HEF4013BT,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 2.4mA |
| Clock Frequency | 40MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 3.4mA 3.4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 60ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| fmax-Min | 7 MHz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
HEF4013BT,653 Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Differential. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. A voltage of 3V~15Vis used as the supply voltage. In this case, the operating temperature is -40°C~125°C TA. D-Typeis the type of this D latch. The 4000Bseries comprises this type of FPGA. You should not exceed 40MHzin its output frequency. The element count is 2 . T flip flop consumes 4μA quiescent energy. A total of 14 terminations have been made. The 4013 family contains it. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 7.5pFfarad input capacitance. This board has 14 pins. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. The 2.4mA output current allows it to be designed with the greatest amount of flexibility.
HEF4013BT,653 Features
Tape & Reel (TR) package
4000B series
14 pins
HEF4013BT,653 Applications
There are a lot of Nexperia USA Inc. HEF4013BT,653 Flip Flops applications.
- Computers
- Balanced 24 mA output drivers
- Latch-up performance
- Data storage
- Digital electronics systems
- Shift Registers
- Load Control
- Bounce elimination switch
- Storage registers
- 2 – Bit synchronous counter
