HEF4013BTT-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100, 4000B |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 40MHz |
| Propagation Delay | 220 ns |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 3.4mA 3.4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 60ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
HEF4013BTT-Q100J Overview
14-TSSOP (0.173, 4.40mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. It is configured with Differentialas an output. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 3V~15Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the Automotive, AEC-Q100, 4000B series. This D flip flop should not have a frequency greater than 40MHz. In total, it contains 2 elements. There is 4μA quiescent consumption. There are 14 terminations,You can search similar parts based on 4013. It is powered from a supply voltage of 5V. Its input capacitance is 7.5pFfarads. The electronic part is mounted in the way of Surface Mount. It is designed with 14 pins. This device has the clock edge trigger type of Positive Edge. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 3V.
HEF4013BTT-Q100J Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 4000B series
14 pins
HEF4013BTT-Q100J Applications
There are a lot of Nexperia USA Inc. HEF4013BTT-Q100J Flip Flops applications.
- Consumer
- Communications
- Counters
- Differential Individual
- QML qualified product
- Supports Live Insertion
- Parallel data storage
- Buffered Clock
- Frequency Divider circuits
- Load Control
