HEF4013BTT,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Clock Frequency | 40MHz |
| Propagation Delay | 220 ns |
| Turn On Delay Time | 30 ns |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 3.4mA 3.4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 60ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
HEF4013BTT,112 Overview
In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. It is contained within the Tubepackage. T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 3V~15V is required for operation. It is operating at a temperature of -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 4000B series. A frequency of 40MHzshould be the maximum output frequency. It consumes 4μA of quiescent current without being affected by external factors. There are 14 terminations,This D latch belongs to the family of 4013. It is powered by a voltage of 5V . Input capacitance of this device is 7.5pF farads. It is mounted in the way of Surface Mount. The 14pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. Normally, the supply voltage (Vsup) should be kept above 3V. The superior flexibility of this circuit is achieved by using 2 circuits. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
HEF4013BTT,112 Features
Tube package
4000B series
14 pins
HEF4013BTT,112 Applications
There are a lot of Nexperia USA Inc. HEF4013BTT,112 Flip Flops applications.
- Frequency division
- Load Control
- Control circuits
- EMI reduction circuitry
- ATE
- Computing
- Asynchronous counter
- Test & Measurement
- Set-reset capability
- Common Clocks
