HEF40175BT,653
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 40175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 45MHz |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 3.4mA 3.4mA |
| Max Propagation Delay @ V, Max CL | 45ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| Number of Input Lines | 4 |
| fmax-Min | 5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
HEF40175BT,653 Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. It is configured with Differentialas an output. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 3V~15V volts. In this case, the operating temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 4000B series. Its output frequency should not exceed 45MHz. In total, it contains 1 elements. This process consumes 4μA quiescents. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 40175 family. Power is provided by a 5V supply. A JK flip flop with a 7.5pFfarad input capacitance is used here. In this case, the electronic component is mounted in the way of Surface Mount. The 16pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. It is designed with a number of bits of 4. Keeping the supply voltage (Vsup) above 3V is necessary for normal operation. This input has 4lines in it.
HEF40175BT,653 Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
HEF40175BT,653 Applications
There are a lot of Nexperia USA Inc. HEF40175BT,653 Flip Flops applications.
- Individual Asynchronous Resets
- Set-reset capability
- QML qualified product
- Cold spare funcion
- ESD performance
- Frequency Dividers
- Automotive
- Shift Registers
- Test & Measurement
- Communications
