HEF40373BT,653
| Parameters | |
|---|---|
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -3.6mA |
| Low Level Output Current | 32mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 40373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
HEF40373BT,653 Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). It is packaged in the way of Tape & Reel (TR). Tri-State is used for the output it is configured with. In this electrical device, the logic type is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. It operates at a voltage of 3V~15V. It operates at -40°C~85°C degrees Celsius. An FPGA in this series belongs to the 4000B family. It is designed with 8 bits. A device such as this has 20 terminations designed. It is a member of the 40373 family. In order to operate it, the supply voltage must be 5V. 20 pins are provided. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. This device has 2 ports. If the supply voltage (Vsup) is greater than 3V, then the device is working correctly. Input Lines consist of electronic circuits, and there are 8. 32mA is set as the low level output current. There is -3.6mA output current at the high level.
HEF40373BT,653 Features
20-SOIC (0.295, 7.50mm Width) package
4000B series
8 Bits
40373 family
20 pin count
20 pins
HEF40373BT,653 Applications
There are a lot of Nexperia USA Inc. HEF40373BT,653 Latches applications.
- Motor Drives
- Bus system register with enable parallel lines at bus side
- Counters
- Synchronous frequency dividers
- Parallel data synchronization
- Shift Registers
- Lamp and Display (LED)
- Buffer/Storage Registers
- Communication systems
- Automatic test equipment
