HEF4044BP,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4044 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 4:4 |
| Supply Voltage-Max (Vsup) | 15V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 3mA |
| Logic Type | S-R Latch |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 185 ns |
| Trigger Type | LOW LEVEL |
| Independent Circuits | 4 |
| Delay Time - Propagation | 30ns |
| Length | 21.6mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
HEF4044BP,652 Overview
A package called 16-DIP (0.300, 7.62mm) contains it. It is packaged in the way of Tube. The output it is configured with uses Tri-State. This electrical device has Logic type S-R Latch. Mounting this electronic component follows the Through Hole method. A 3V~15V voltage supply is required for operation. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 4000B series. The design of this electronic part contains 4 bits. This device is designed with 16 terminations. As a member of the 4044 family, it falls under that category. With the supply voltage set at 5V, it is able to operate. There are 16 pins on it. It belongs to the subcategory of FF/Latches. There is a maximum voltage supply (Vsup) that reaches 15V. There are 5/15V power supplies required for this machine to operate. Ensure that the supply voltage (Vsup) is greater than 3V. Based on its reliable performance, this device is suitable for BULK PACK.
HEF4044BP,652 Features
16-DIP (0.300, 7.62mm) package
4000B series
4 Bits
4044 family
16 pin count
5/15V power supplies
HEF4044BP,652 Applications
There are a lot of NXP USA Inc. HEF4044BP,652 Latches applications.
- Instrumentation
- Decade counting
- Programmable binary
- Automotive HEV/EV Powertrain
- Storage
- Automatic test equipment
- Avionics
- A/D converters
- Motor Drives
- Watches
