HEF4051BT-Q100,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 175Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 4051 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 20μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-off Time-Max | 240ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Drain to Source Resistance | 2.5kOhm |
| Length | 9.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
HEF4051BT-Q100,118 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. 8:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. This multiplexer is composed of 1 circuits. 4051 can be used to search for analog multiplexer variants. It has an internal resistance of 175Ohm. You can find the functions of the 16 pins in the datasheets. Users should never supply a voltage higher than 15V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 3V. The switch device would be able to operate with 20μA current. An analogue multiplexer drains from a single voltage supply at 3V~15V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. The electrical component supports 8 inputs. Drain to Source resistance is 2.5kOhm. Automotive, AEC-Q100 is a series number.
HEF4051BT-Q100,118 Features
8 Channels
20μA Supply Current
-3db Bandwidth: 70MHz
Drain-to-Source resistance: 2.5kOhm
HEF4051BT-Q100,118 Applications
There are a lot of Nexperia USA Inc. HEF4051BT-Q100,118 Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Medical
- Isolation
- Digital access cross connects
- Cable Modem
- DSUs
- Precision data acquisition
- PCMCIA cards
- CSU
- Power routing
