HEF4051BTS,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 175Ohm |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4051 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 20μA |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 280 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Bandwidth | 70MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Turn-Off Delay Time | 290 ns |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 230ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
HEF4051BTS,112 Overview
The electrical component comes in 16-SSOP (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Around -40°C~125°C TA is the extended operating temperature. 16 terminations have been made so far. A 8 channel electronic part produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 16 series of products. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with 4051. There is 175Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 15V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 3V should be applied to the electronic component. The switch device would be able to operate with 20μA current. This analog switch requires a voltage of 3V~15V to drain from a single voltage supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. In 70MHz-bandwidths, data can be transferred.
HEF4051BTS,112 Features
8 Channels
20μA Supply Current
Bandwidth: 70MHz
HEF4051BTS,112 Applications
There are a lot of Nexperia USA Inc. HEF4051BTS,112 Analog Switches & Multiplexers ICs applications.
- DSLAMs
- CSU
- Wireless Local Loop
- Switching Systems
- Cable PC
- Sample-and-hold systems
- Routers
- Fiber to the Home
- Precision instrumentation
- SDH/SONET multiplexers
