HEF4051BTT-Q100,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 175Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 4051 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 20μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-off Time-Max | 240ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
HEF4051BTT-Q100,11 Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. There are 16 terminations totally. The electronic part delivers high-quality output through its 8 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits number 1 make up this analogue multiplexer. Try searching with 4051 if you're looking for variants. As far as internal resistance is concerned, it has 175Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In normalcircumstances, users should not exceed 15V volts for the multiplexer. Analog switch ics with Dual, Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 3V. In order to operate this switch device, it would need a current of 20μA. A voltage of 3V~15V is required to drain this analog switch from a single voltage supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. Operating 8 inputs is required. The Automotive, AEC-Q100 series contains it.
HEF4051BTT-Q100,11 Features
8 Channels
20μA Supply Current
-3db Bandwidth: 70MHz
HEF4051BTT-Q100,11 Applications
There are a lot of Nexperia USA Inc. HEF4051BTT-Q100,11 Analog Switches & Multiplexers ICs applications.
- Isolation
- Communication systems
- Precision test equipment
- Low-Voltage
- Central office
- Cell phones
- Digital access cross connects
- Video signal routing
- Transmit
- New designs requiring multiplexer functions
