Parameters |
Base Part Number |
4052 |
Pin Count |
16 |
JESD-30 Code |
R-PDIP-T16 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
15V |
Power Supplies |
5/15V |
Number of Channels |
4 |
Number of Circuits |
2 |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Supply Current-Max (Isup) |
0.6mA |
-3db Bandwidth |
70MHz |
On-State Resistance (Max) |
155Ohm |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
200nA |
Channel Capacitance (CS(off), CD(off)) |
7.5pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SP4T |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Crosstalk |
-50dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
85ns |
Switch-off Time-Max |
180ns |
Voltage - Supply, Single (V+) |
3V~15V |
Height Seated (Max) |
4.7mm |
RoHS Status |
ROHS3 Compliant |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
Published |
2011 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
HEF4052BP,652 Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -40°C~125°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 4 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. Based on SP4T switching circuits, these analog multiplexers work. 2 circuits are used in this analogue multiplexer. Using the 4052 search parameter, you can discover variants of the switch. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage of 3V~15V is required for this switch device, which drains from a single voltage source. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
HEF4052BP,652 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 70MHz
HEF4052BP,652 Applications
There are a lot of NXP USA Inc. HEF4052BP,652 Analog Switches & Multiplexers ICs applications.
- Battery-powered systems
- High-Voltage
- T1/E1 Terminals
- RGB switches
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Digital Cross-Connects
- High reliability control systems
- 65 V DACs
- New designs requiring multiplexer functions
- Audio/video switches