HEF4052BT,013
| Parameters | |
|---|---|
| Turn-Off Delay Time | 205 ns |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-off Time-Max | 190ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 155Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4052 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 260 ns |
| Bandwidth | 70MHz |
HEF4052BT,013 Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. 4:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~125°C TA. 16 terminations have been made so far. A electrical component with 8 channels is capable of high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. The electrical component body receives 16 pins. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this multiplexer. Try searching with 4052 if you're looking for variants. The internal resistance of this digital multiplexer is 155Ohm. Datasheets for 16 pin functions are available upon request. In normalcircumstances, users should not exceed 15V volts for the multiplexer. There should be 3V voltage fed to the electrical part below 3V. Using a single voltage supply, this switch device consumes 3V~15V volts. The transfer of data can be performed over 70MHz bandwidths.
HEF4052BT,013 Features
8 Channels
Switch Circuit: SP4T
Bandwidth: 70MHz
HEF4052BT,013 Applications
There are a lot of Nexperia USA Inc. HEF4052BT,013 Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Sample hold systems
- Medical systems
- Communication systems
- Relay replacements
- SONET/SDH ADM
- Battery Powered Systems
- Sample-and-hold systems
- Industrial control systems
- RGB switches
