HEF4052BTT,112

SP4T 155Ohm DUAL Analog Switches 4052 16 Pins 200nA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-HEF4052BTT,112
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 289
Description: SP4T 155Ohm DUAL Analog Switches 4052 16 Pins 200nA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
Published	2013
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	155Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	4052
Pin Count	16
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	15V
Min Supply Voltage	3V
Operating Supply Current	20μA
Power Dissipation	500mW
Propagation Delay	5 ns
Turn On Delay Time	260 ns
Bandwidth	70MHz
Turn-Off Delay Time	205 ns
On-State Resistance (Max)	155Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Number of Input Lines	4
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	7.5pF
On-state Resistance Match-Nom	25Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-50dB @ 1MHz
Switch-off Time-Max	190ns
Voltage - Supply, Single (V+)	3V~15V
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

HEF4052BTT,112 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 4:1. Extended operating temperature around -40°C~125°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 8 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. Based on SP4T switching circuits, these analog multiplexers work. A total of 2 circuits make up this switch device. Using the 4052 search parameter, you can discover variants of the switch. It has an internal resistance of 155Ohm. To find out what the 16 pins do, please refer to the datasheets. Multiplexers should not be powered above 15V in normal situations. 3V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 20μA. An analogue multiplexer drains from a single voltage supply at 3V~15V. This switch operates within the bandwidth of 70MHz.