HEF4053BP,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4053 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 15V |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Supply Current-Max (Isup) | 0.6mA |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-on Time-Max | 140ns |
| Switch-off Time-Max | 220ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Signal Current-Max | 0.01A |
| Height Seated (Max) | 4.7mm |
| Length | 21.6mm |
| RoHS Status | ROHS3 Compliant |
HEF4053BP,652 Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Through Hole position. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~125°C TA. 16 terminations have been made so far. A 2 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. There is an electrical component included in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. It consists of 3 circuits. Search with 4053 if you are looking for analog multiplexer variants. A analogue multiplexer of this type is a Multiplexer or Switches. Using only a single voltage supply, this analog switch requires 3V~15V voltage. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.
HEF4053BP,652 Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 70MHz
HEF4053BP,652 Applications
There are a lot of NXP USA Inc. HEF4053BP,652 Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Precision data acquisition
- Digital access cross connects
- Automatic test equipment
- Routers
- Optical Applications
- Fiber In The Loop (FITL)
- Voice over IP/DSL – Integrated Access Devices, Smart
- Sample hold systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
