HEF4053BT,652

SPDT 155Ohm DUAL Analog Switches 4053 16 Pins 200nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-HEF4053BT,652
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 868
Description: SPDT 155Ohm DUAL Analog Switches 4053 16 Pins 200nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
Published	2011
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	4053
Pin Count	16
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	15V
Number of Channels	2
Number of Circuits	3
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
-3db Bandwidth	70MHz
On-State Resistance (Max)	155Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	7.5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-50dB @ 1MHz
Switch-on Time-Max	140ns
Switch-off Time-Max	220ns
Voltage - Supply, Single (V+)	3V~15V
Height Seated (Max)	1.75mm
Length	9.9mm
RoHS Status	ROHS3 Compliant

HEF4053BT,652 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~125°C TA. Totally, there are 16 terminations. A electrical component with 2 channels is capable of high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 16 series. The analog switch ics are built using SPDT switching circuits. This multiplexer is composed of 3 circuits. Try searching with 4053 to find analog multiplexer variants. To find out what the 16 pins do, please refer to the datasheets. This analog switch requires a voltage of 3V~15V to drain from a single voltage supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC.