Parameters |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
4053 |
Pin Count |
16 |
Number of Outputs |
6 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
15V |
Number of Channels |
2 |
Number of Circuits |
3 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
-3db Bandwidth |
70MHz |
On-State Resistance (Max) |
155Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
200nA |
Channel Capacitance (CS(off), CD(off)) |
7.5pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPDT |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Crosstalk |
-50dB @ 1MHz |
Switch-on Time-Max |
140ns |
Switch-off Time-Max |
220ns |
Voltage - Supply, Single (V+) |
3V~15V |
Drain to Source Resistance |
175Ohm |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
HEF4053BT,653 Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature extended to -40°C~125°C TA. In total, 16 terminations have occurred. As a result of its 2 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. A SPDT switching circuit is used for these analog switches. 3 circuits are used in this analogue multiplexer. Use 4053 to search for variants of the digital switches. To find out what the 16 pins do, please refer to the datasheets. The voltage required by this switch device is 3V~15V, draining from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. There is 175Ohm resistance between the Drain and Source on this part. In this digital multiplexer, there are 6 outputs.
HEF4053BT,653 Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 70MHz
Drain-to-Source resistance: 175Ohm
HEF4053BT,653 Applications
There are a lot of Nexperia USA Inc. HEF4053BT,653 Analog Switches & Multiplexers ICs applications.
- Isolation
- Cellular phones
- Multiplexers
- Routers
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- MP3 players
- Sample-and-hold systems
- Modems
- Cable PC
- Remote wireless modules