HEF4053BTT,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 175Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4053 |
| Pin Count | 16 |
| Number of Channels | 6 |
| Number of Circuits | 3 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 20μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 565 ns |
| Supply Type | Dual, Single |
| Bandwidth | 70MHz |
| Turn-Off Delay Time | 400 ns |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-on Time-Max | 140ns |
| Switch-off Time-Max | 220ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HEF4053BTT,112 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operation at a temperature around -40°C~125°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 6 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPDT switching circuit are built. Circuits number 3 make up this analogue multiplexer. Try searching for 4053 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 175Ohm. For functions related to 16 pins, please refer to the datasheets. Multiplexers should not be powered above 15V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. 3V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 20μA current. This analogue multiplexer requires a voltage of 3V~15V when it drains from a single voltage supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. There are 70MHz bandwidths for data transfer.
HEF4053BTT,112 Features
6 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 70MHz
HEF4053BTT,112 Applications
There are a lot of Nexperia USA Inc. HEF4053BTT,112 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Intelligent PBX
- PBX interfaces
- Industrial control systems
- Multiplexers
- ATM
- Residential Gateways, Home Gateway/Router
- Frame Relay Equipment
- Precision data acquisition
- Medical Instrumentation
