HEF4053BTT,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 175Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4053 |
| Pin Count | 16 |
| Number of Channels | 6 |
| Number of Circuits | 3 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 20μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 565 ns |
| Supply Type | Dual, Single |
| Bandwidth | 70MHz |
| Turn-Off Delay Time | 400 ns |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-on Time-Max | 140ns |
| Switch-off Time-Max | 220ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
HEF4053BTT,118 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. In total, there are 16 terminations. The electronic part delivers high-quality output through its 6 channels. A 15V voltage supply should turn on and run the electronic component. Into the electrical component body are injected 16 pins. SPDT switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 3. Try searching with 4053 to find analog multiplexer variants. It has an internal resistance of 175Ohm. For functions related to 16 pins, please refer to the datasheets. Users should never supply a voltage higher than 15V to a switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 3V as the lowest voltage for the electrical part. For this digital switch to work, 20μA current would suffice. Using a single voltage supply, this switch device consumes 3V~15V volts. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. It is possible to transfer data over a 70MHz-bandwidth.
HEF4053BTT,118 Features
6 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 70MHz
HEF4053BTT,118 Applications
There are a lot of Nexperia USA Inc. HEF4053BTT,118 Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Cross Connects
- HDTV
- Ultrasound
- Mechanical reed relay replacement
- Frame Relay Equipment
- Isolation
- Optical Applications
- Communication systems
- New designs requiring multiplexer functions
