HEF4066BP,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HEF4066B |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Normal Position | NO |
| Length | 19.025mm |
| RoHS Status | ROHS3 Compliant |
HEF4066BP,652 Overview
Shipping overseas is convenient due to the electrical component's packing in 14-DIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, you'll find this switch device. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, 14 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 14 series. A SPST - NO switching circuit is used to build these analog multiplexers. It consists of 4 circuits. Try searching for HEF4066B variants of the analog switch ic. Theswitch device is a typical Multiplexer or Switches. Analogue multiplexers require a 3V~15V voltage to drain from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
HEF4066BP,652 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 90MHz
HEF4066BP,652 Applications
There are a lot of NXP USA Inc. HEF4066BP,652 Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Digital Cross-Connects
- 65 V DACs
- Video signal routing
- Wireless Local Loop
- Low-Voltage
- Cable Modem
- Precision data acquisition
- DSUs
- High speed data transmission line cards
