banner_page

HEF4066BT-Q100J

SPST - NO 155Ohm Analog Switches 4066 14 Pins 200nA 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-HEF4066BT-Q100J
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 598
  • Description: SPST - NO 155Ohm Analog Switches 4066 14 Pins 200nA 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2014
Series Automotive, AEC-Q100
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 155Ohm
Base Part Number 4066
Pin Count 14
Max Supply Voltage 15V
Min Supply Voltage 3V
Operating Supply Current 4μA
Power Dissipation 500mW
Throw Configuration SPST
Number of Inputs 4
Supply Type Single
-3db Bandwidth 90MHz
On-State Resistance (Max) 155Ohm
Multiplexer/Demultiplexer Circuit 1:1
Current - Leakage (IS(off)) (Max) 200nA
Channel Capacitance (CS(off), CD(off)) 7.5pF
Switch Circuit SPST - NO
Channel-to-Channel Matching (ΔRon) 5 Ω
Crosstalk -50dB @ 1MHz
Voltage - Supply, Single (V+) 3V~15V
Radiation Hardening No
RoHS Status ROHS3 Compliant

HEF4066BT-Q100J Overview


This electronic part is conveniently packaged in 14-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~125°C TA degrees Celsius. Electronic part bodies are injected with 14 pins. SPST - NO switching circuits are used in these analog switch ics. Try searching for the analog switch ic with 4066 if you are looking for variants. The internal resistance of this digital multiplexer is 155Ohm. For functions related to 14 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 15V. The digital multiplexer has a low cost Single supply. 3V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 4μA. An analogue multiplexer drains from a single voltage supply at 3V~15V. In order to operate the 4 inputs, there are several steps to follow. The Automotive, AEC-Q100 series is responsible for it.

HEF4066BT-Q100J Features


Switch Circuit: SPST - NO
4μA Supply Current
-3db Bandwidth: 90MHz

HEF4066BT-Q100J Applications


There are a lot of Nexperia USA Inc. HEF4066BT-Q100J Analog Switches & Multiplexers ICs applications.

  • Mechanical reed relay replacement
  • E1 Network Equipment
  • Microprocessor Controlled Analog Systems
  • Remote wireless modules
  • Residential Gateways, Home Gateway/Router
  • Modems
  • Ultrasound
  • Cellular phones
  • USB 1.1 signal switching circuits
  • HDTV

Write a review

Note: HTML is not translated!
    Bad           Good