HEF4067BP,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | TIN |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4067 |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Qualification Status | Not Qualified |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Supply Current-Max (Isup) | 0.6mA |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-off Time-Max | 340ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| RoHS Status | ROHS3 Compliant |
HEF4067BP,652 Overview
Packed in 24-DIP (0.600, 15.24mm), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Through Hole. 16:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 24 terminations. A high-quality output is provided by the electrical component's 16 channels. A 15V voltage supply should turn on and run the electronic component. This electronic part can be found in the 24 series. The circuits in this analogue multiplexer number 1. 4067 can be used to search for analog multiplexer variants. There is a standard Multiplexer or Switches analogue multiplexer here. This analog switch requires a voltage of 3V~15V to drain from a single voltage supply. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
HEF4067BP,652 Features
16 Channels
-3db Bandwidth: 70MHz
HEF4067BP,652 Applications
There are a lot of NXP USA Inc. HEF4067BP,652 Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Digital Cross-Connects
- Residential Gateways, Home Gateway/Router
- MP3 players
- Battery Powered Instruments
- Optical Applications
- Precision instrumentation
- E1 Multiplexer
- Voice over IP/DSL – Integrated Access Devices, Smart
- Sample-and-hold systems
