HEF4067BT-Q100J
| Parameters | |
|---|---|
| Pin Count | 24 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 340 ns |
| Bandwidth | 70MHz |
| Turn-Off Delay Time | 435 ns |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Voltage - Supply, Single (V+) | 3V~15V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 155Ohm |
| Max Power Dissipation | 500mW |
| Base Part Number | 4067 |
HEF4067BT-Q100J Overview
This electronic part is conveniently packaged in 24-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 16:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. A high-quality output is provided by the electrical component's 16 channels. A total of 24 pins are injected into the body of the electronic part. There are 1 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with 4067. It has an internal resistance of 155Ohm. To find out what the 24 pins do, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 15V. It is recommended that the electrical component receives a voltage of 3V. The voltage required by this switch device is 3V~15V, draining from a single voltage supply. It is possible to transfer data over a 70MHz-bandwidth. The Automotive, AEC-Q100 series is responsible for it.
HEF4067BT-Q100J Features
16 Channels
Bandwidth: 70MHz
HEF4067BT-Q100J Applications
There are a lot of Nexperia USA Inc. HEF4067BT-Q100J Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Intelligent PBX
- ATM
- Low-Voltage
- E1 Multiplexer
- Routers
- Medical
- Automatic test equipment
- Channelized and Unchannelized DS3 applications
- Multiplexers
