banner_page

HI-8195PCIF

35ns, 20ns SPST - NO 31Ohm QUAD Analog Switches 16 Pins 5nA Max 3.3V 16-WQFN Exposed Pad, CSP


  • Manufacturer: Holt Integrated Circuits Inc.
  • Nocochips NO: 382-HI-8195PCIF
  • Package: 16-WQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 564
  • Description: 35ns, 20ns SPST - NO 31Ohm QUAD Analog Switches 16 Pins 5nA Max 3.3V 16-WQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-WQFN Exposed Pad, CSP
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Resistance 31Ohm
Terminal Finish Matte Tin (Sn)
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 3.3V
Terminal Pitch 0.8mm
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 16
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Power Dissipation 1.702W
Number of Inputs 4
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 31Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 65 dB
Current - Leakage (IS(off)) (Max) 5nA Max
Channel Capacitance (CS(off), CD(off)) 12pF 46pF
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 35ns, 20ns
Charge Injection -10pC
Switch-on Time-Max 75ns
Voltage - Supply, Dual (V±) ±3V~10V
Height Seated (Max) 0.8mm
Length 5mm
Width 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

HI-8195PCIF Overview


Shipping overseas is convenient with the electronic component packed in 16-WQFN Exposed Pad, CSP. The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 3.3V voltage supply. A total of 16 pins are injected into the electrical part body. Based on SPST - NO switching circuits, these analog multiplexers work. The internal resistance of this digital multiplexer is 31Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. It is possible to operate 4 inputs. To power the multiplexer ics, the voltage must be set at 2.5V.

HI-8195PCIF Features


1 Channels
Switch Circuit: SPST - NO

HI-8195PCIF Applications


There are a lot of Holt Integrated Circuits Inc. HI-8195PCIF Analog Switches & Multiplexers ICs applications.

  • Remote Powered Equipment
  • Audio signal routing
  • Digital cross connects (DSX-1)
  • Cable Modem
  • PDAs
  • Communication systems
  • Imaging
  • Microwave transmission systems
  • Automatic test equipment
  • Frame Relay Equipment

Write a review

Note: HTML is not translated!
    Bad           Good