banner_page

HI-8196PCTF

35ns, 20ns (Typ) SPST - NC 31Ohm QUAD Analog Switches 16 Pins 5nA 3.3V 16-WQFN Exposed Pad, CSP


  • Manufacturer: Holt Integrated Circuits Inc.
  • Nocochips NO: 382-HI-8196PCTF
  • Package: 16-WQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 526
  • Description: 35ns, 20ns (Typ) SPST - NC 31Ohm QUAD Analog Switches 16 Pins 5nA 3.3V 16-WQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-WQFN Exposed Pad, CSP
Surface Mount YES
Operating Temperature -55°C~125°C TA
Packaging Tube
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Resistance 31Ohm
Terminal Finish Matte Tin (Sn)
Technology CMOS
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 3.3V
Terminal Pitch 0.8mm
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 16
JESD-30 Code S-PQCC-N16
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Number of Circuits 4
On-State Resistance (Max) 31Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 65 dB
Current - Leakage (IS(off)) (Max) 5nA
Channel Capacitance (CS(off), CD(off)) 12pF
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 35ns, 20ns (Typ)
Charge Injection -10pC
Switch-on Time-Max 75ns
Voltage - Supply, Dual (V±) ±3V~10V
Height Seated (Max) 0.8mm
Length 5mm
Width 5mm
RoHS Status ROHS3 Compliant

HI-8196PCTF Overview


The electronic component is convenient to ship overseas because it is packed in a 16-WQFN Exposed Pad, CSP. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -55°C~125°C TA. The total number of terminations is 16. A electrical component with 1 channels is capable of high-quality output. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. There are 4 circuits in this multiplexer. An switch multiplexer with 31Ohm internal resistance has a value of 31Ohm. To supply the switch device, a voltage of 2.5V must be applied.

HI-8196PCTF Features


1 Channels
Switch Circuit: SPST - NC

HI-8196PCTF Applications


There are a lot of Holt Integrated Circuits Inc. HI-8196PCTF Analog Switches & Multiplexers ICs applications.

  • Audio and video signal routing
  • Digital cross connects (DSX-1)
  • Channel Banks
  • Cable PC
  • Medical Instrumentation
  • Routers
  • RGB switches
  • PDAs
  • FTTH
  • Frame Relay Equipment

Write a review

Note: HTML is not translated!
    Bad           Good