HI-8196PSIF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 31Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 31Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA Max |
| Channel Capacitance (CS(off), CD(off)) | 12pF 46pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 35ns, 20ns |
| Charge Injection | -10pC |
| Switch-on Time-Max | 75ns |
| Voltage - Supply, Dual (V±) | ±3V~10V |
| Height Seated (Max) | 1.727mm |
| Length | 9.9mm |
| Width | 3.87mm |
| RoHS Status | ROHS3 Compliant |
HI-8196PSIF Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. With a 3.3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NC switching circuits. 4 circuits are used in this analogue multiplexer. As far as internal resistance is concerned, it has 31Ohm. Providing power to the analogue multiplexer requires a voltage of 2.5VV.
HI-8196PSIF Features
1 Channels
Switch Circuit: SPST - NC
HI-8196PSIF Applications
There are a lot of Holt Integrated Circuits Inc. HI-8196PSIF Analog Switches & Multiplexers ICs applications.
- DVD-R
- Frame Relay Equipment
- Digital access cross connects
- DSLAMs
- Automatic test equipment
- HDTV
- Cable Modem
- Remote wireless modules
- SDH
- Sample hold systems
