HI1-0507-2
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Channels | 1 |
| Max Supply Voltage | 25V |
| Power Dissipation-Max | 60mW |
| Operating Supply Current | 1.5mA |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Supply Current-Max (Isup) | 3mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 22V |
| Min Dual Supply Voltage | 10V |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 9Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 5.92mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
HI1-0507-2 Overview
The electronic part can be shipped overseas conveniently because it is packaged in CDIP. This packaging method provides high reliability because it uses advanced packaging techniques. In total, 28 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An electrical component like this is included in the 28 series. Internally, this switch multiplexer has a resistance of 300Ohm. To find out what the 28 pins do, please refer to the datasheets. In normalcircumstances, users should not exceed 25V volts for the multiplexer. Analogue multiplexer with a Dual supply type that is cost-effective. This digital switch can be operated with a current of 1.5mA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. You should attach at least 10V voltage if you are using dual power supply. The electrical part can be operated at 15V voltage levels. Temperatures above 125°C should not be used to operate the switches.
HI1-0507-2 Features
1 Channels
1.5mA Supply Current
HI1-0507-2 Applications
There are a lot of Intersil (Renesas Electronics America) HI1-0507-2 Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- PDH Multiplexers
- Audio and video routing
- High reliability control systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Automotive applications
- DSUs
- 65 V DACs
- Digital access cross connects
- Industrial control systems
