HI1-0508A-2
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-GDIP-T16 |
| Power Supplies | +-15V |
| Number of Channels | 8 |
| Number of Circuits | 8 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Supply Current-Max (Isup) | 2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 100μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 500ns |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
HI1-0508A-2 Overview
The electrical component comes in 16-CDIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Through Hole. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C. In total, 16 terminations have occurred. Due to its 8 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component like this is included in the 16 series. It consists of 8 circuits. Multiplexer or Switches is a typical switch device. Despite this switch device's dual supply capability, its voltage should not exceed 18V. For dual power supplies, a voltage of at least 4.5V should be attached. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.
HI1-0508A-2 Features
8 Channels
HI1-0508A-2 Applications
There are a lot of Maxim Integrated HI1-0508A-2 Analog Switches & Multiplexers ICs applications.
- Video switching
- Channelized and Unchannelized DS3 applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Intelligent PBX
- Battery Powered Systems
- CSU
- PDAs
- Industrial control systems
- Microprocessor controlled systems
- Remote wireless modules
