HI1-0509-4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-GDIP-T16 |
| Supply Voltage-Min (Vsup) | 10V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 10pF 30pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Channel-to-Channel Matching (ΔRon) | 20 Ω |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Neg Supply Voltage-Min (Vsup) | -10V |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
HI1-0509-4 Overview
Presented in 16-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 4:1. An extended operating temperature of -25°C~85°C TA degrees Celsius. Totally, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Multiplexers built on a SP4T switching circuit are built. There are 2 circuits in this multiplexer. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. Providing power to the analogue multiplexer requires a voltage of 10VV.
HI1-0509-4 Features
4 Channels
Switch Circuit: SP4T
HI1-0509-4 Applications
There are a lot of Rochester Electronics, LLC HI1-0509-4 Analog Switches & Multiplexers ICs applications.
- Communications systems
- High speed data transmission line cards
- PBXs
- Digital Cross-Connects
- Cable Modem
- Cable PC
- Switching Systems
- Relay replacements
- Channelized and Unchannelized DS3 applications
- Relay Replacement
