HI3-0303-5Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | HI-303 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Input Voltage (Min) | -15V |
| Input Voltage (Max) | 15V |
| Voltage - Supply, Single/Dual (±) | 5V~34V ±5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 16pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 30pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Normal Position | NO/NC |
| Height Seated (Max) | 5.33mm |
| Length | 19.17mm |
| RoHS Status | ROHS3 Compliant |
HI3-0303-5Z Overview
Shipping overseas is convenient due to the electrical component's packing in 14-DIP (0.300, 7.62mm). High reliability is achieved by using advanced packaging method Tube. Through Hole is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Around 0°C~75°C TA is the extended operating temperature. 14 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 14 series. A SPDT switching circuit is used for these analog switches. There are 2 circuits in this multiplexer. Use HI-303 to search for variants of the digital switches. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
HI3-0303-5Z Features
1 Channels
Switch Circuit: SPDT
HI3-0303-5Z Applications
There are a lot of Renesas Electronics America Inc. HI3-0303-5Z Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Video signal routing
- Public switching systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Battery-powered systems
- Battery Powered Systems
- SDH/SONET multiplexers
- Residential Gateways, Home Gateway/Router
- RGB switches
- Imaging
