HI3-0507-5Z
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 10V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 10pF 30pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 250ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 20 Ω |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Neg Supply Voltage-Min (Vsup) | -10V |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 6.35mm |
| Length | 37.4mm |
| RoHS Status | ROHS3 Compliant |
HI3-0507-5Z Overview
Shipping overseas is convenient with the electronic component packed in 28-DIP (0.600, 15.24mm). This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around 0°C~75°C TA. In total, 28 terminations have occurred. This electronic part offers high-quality output due to its 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. 28 pins are injected to the electronic part body. The multiplexer consists of 2 circuits. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. To power the multiplexer ics, the voltage must be set at 10V.
HI3-0507-5Z Features
8 Channels
HI3-0507-5Z Applications
There are a lot of Rochester Electronics, LLC HI3-0507-5Z Analog Switches & Multiplexers ICs applications.
- SDH
- Industrial control systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cellular phones
- Microprocessor Controlled Analog Systems
- SONET/SDH ADM
- RGB switches
- Audio and video routing
- Sample-and-hold systems
- Battery Powered Systems
