HI3-0508A-5+
| Parameters | |
|---|---|
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HI3-0508 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Supply Current-Max (Isup) | 2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.5kOhm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
HI3-0508A-5+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Through Hole, this analog switch is mounted. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Increasing operating temperature to around 0°C~75°C TA. Totally, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with HI3-0508. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. This digital multiplexer requires 4.5V voltage as a minimum supply voltage.
HI3-0508A-5+ Features
8 Channels
HI3-0508A-5+ Applications
There are a lot of Maxim Integrated HI3-0508A-5+ Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Imaging
- Microwave transmission systems
- Cross Connects
- Low-Voltage
- Precision data acquisition
- Digital access cross connects
- Cellular phones
- Ultrasound
- Communications systems
