HI3-0546-5
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | TIN LEAD |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| JESD-30 Code | R-PDIP-T28 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.8kOhm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 10pF 52pF |
| On-state Resistance Match-Nom | 126Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 126 Ω |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 6.35mm |
| Length | 37.4mm |
| RoHS Status | Non-RoHS Compliant |
HI3-0546-5 Overview
The electronic component is convenient to ship overseas because it is packed in a 28-DIP (0.600, 15.24mm). Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Through Hole position. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around 0°C~75°C TA. There are 28 terminations totally. Due to its 16 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 28 series is equipped with this electronic component. 1 circuits are used in this analogue multiplexer. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. Don’t miss additional features of the electronic component such as: OVERVOLTAGE PROTECTION.
HI3-0546-5 Features
16 Channels
Additional Features: OVERVOLTAGE PROTECTION
HI3-0546-5 Applications
There are a lot of Rochester Electronics, LLC HI3-0546-5 Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Digital access cross connects
- Relay Replacement
- Industrial and process control systems
- Avionics
- Video signal routing
- SONET/SDH ADM
- Precision instrumentation
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Microwave transmission systems
