HI3-0547-5Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | HI-547 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.8kOhm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 10pF 30pF |
| On-state Resistance Match-Nom | 126Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 126 Ω |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 6.35mm |
| Length | 37.4mm |
| RoHS Status | ROHS3 Compliant |
HI3-0547-5Z Overview
This electronic part is conveniently packaged in 28-DIP (0.600, 15.24mm), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. Through Hole is where this multiplexer is located. 8:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around 0°C~75°C TA. There are 28 terminations totally. This electronic part offers high-quality output due to its 8 channels. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 28 pins are injected into the body of the electronic part. It consists of 2 circuits. Look for analog switch ic variants by searching with HI-547. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. Check out the electrical component's additional features, such as the following: OVERVOLTAGE PROTECTION.
HI3-0547-5Z Features
8 Channels
Additional Features: OVERVOLTAGE PROTECTION
HI3-0547-5Z Applications
There are a lot of Renesas Electronics America Inc. HI3-0547-5Z Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Central office
- Power routing
- ATM
- Remote Powered Equipment
- Remote wireless modules
- Fiber In The Loop (FITL)
- Data switching
- Communications systems
- E1 Multiplexer
