HI3-0549-5
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.8kOhm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 10pF 12pF |
| On-state Resistance Match-Nom | 126Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 126 Ω |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 5.33mm |
| Length | 19.17mm |
| RoHS Status | Non-RoHS Compliant |
HI3-0549-5 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. Multiplexer and demultiplexer circuits have a number 4:1. Around 0°C~75°C TA is the extended operating temperature. 16 terminations have been made so far. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. Multiplexers built on a SP4T switching circuit are built. 2 circuits are used in this analogue multiplexer. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. There is also OVERVOLTAGE PROTECTION to look out for in this electronic part.
HI3-0549-5 Features
4 Channels
Switch Circuit: SP4T
Additional Features: OVERVOLTAGE PROTECTION
HI3-0549-5 Applications
There are a lot of Rochester Electronics, LLC HI3-0549-5 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Signal routing between systems
- Battery Powered Systems
- Automatic test equipment
- Cellular phones
- Medical
- Channelized and Unchannelized DS3 applications
- Private Branch Exchange (PBX)
- SONET/SDH ADM
- PBXs
