banner_page

HI3-5043-5

Analog Switches BREAK-BEFORE-MAKE 16 Pins 15V DIP


  • Manufacturer: Intersil (Renesas Electronics America)
  • Nocochips NO: 391-HI3-5043-5
  • Package: DIP
  • Datasheet: PDF
  • Stock: 333
  • Description: Analog Switches BREAK-BEFORE-MAKE 16 Pins 15V DIP(Kg)

Details

Tags

Parameters
Resistance 50Ohm
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 75°C
Min Operating Temperature 0°C
Subcategory Multiplexer or Switches
Technology CMOS
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 15V
Temperature Grade COMMERCIAL EXTENDED
Number of Channels 1
Operating Supply Current 300μA
Nominal Supply Current 1nA
Number of Bits 2
Throw Configuration SPDT
Turn On Delay Time 500 ns
Supply Type Dual
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 500 ns
Off-state Isolation-Nom 80 dB
On-state Resistance Match-Nom 2Ohm
Switching BREAK-BEFORE-MAKE
Height Seated (Max) 5.33mm
Length 19.17mm
RoHS Status RoHS Compliant
Lead Free Contains Lead
Mount Through Hole
Package / Case DIP
Number of Pins 16
Published 1999
JESD-609 Code e0
Part Status Discontinued
Number of Terminations 16

HI3-5043-5 Overview


Due to its DIP packaging, the electronic part is convenient for international shipping. In total, there are 16 terminations. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. In this multiplexer, the internal resistance is 50Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Analogue multiplexer with a Dual supply type that is cost-effective. The analogue multiplexer could operate on 300μA current. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating voltages of 15V are compatible with the electrical part. The switches should not operate in an environment where the temperature is higher than 75°C. It is capable of carrying out 2-bit operation.

HI3-5043-5 Features


1 Channels
300μA Supply Current
2-Bit

HI3-5043-5 Applications


There are a lot of Intersil (Renesas Electronics America) HI3-5043-5 Analog Switches & Multiplexers ICs applications.

  • Sample-and-hold systems
  • 65 V DACs
  • Relay Replacement
  • Intelligent PBX
  • Wireless Local Loop
  • Sample hold systems
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Multi-Line E1 Interface Cards
  • Fault Tolerant Systems
  • Medical systems

Write a review

Note: HTML is not translated!
    Bad           Good