banner_page

HI4P0506-5Z

QUAD Analog Switches BREAK-BEFORE-MAKE 28 Pins 15V PLCC


  • Manufacturer: Intersil (Renesas Electronics America)
  • Nocochips NO: 391-HI4P0506-5Z
  • Package: PLCC
  • Datasheet: PDF
  • Stock: 268
  • Description: QUAD Analog Switches BREAK-BEFORE-MAKE 28 Pins 15V PLCC(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case PLCC
Number of Pins 28
Packaging Bulk
Published 1999
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 28
Resistance 400Ohm
Max Operating Temperature 75°C
Min Operating Temperature 0°C
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Number of Functions 1
Supply Voltage 15V
Pin Count 28
Operating Supply Voltage 15V
Temperature Grade COMMERCIAL EXTENDED
Number of Channels 1
Max Supply Voltage 25V
Operating Supply Current 1.5mA
Turn On Delay Time 250 ns
Logic Function Multiplexer
Supply Type Dual
Supply Current-Max (Isup) 3mA
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 250 ns
Max Dual Supply Voltage 22V
Min Dual Supply Voltage 10V
High Level Output Current 20mA
Dual Supply Voltage 15V
Off-state Isolation-Nom 68 dB
On-state Resistance Match-Nom 9Ohm
Switching BREAK-BEFORE-MAKE
Signal Current-Max 0.02A
Height Seated (Max) 4.57mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

HI4P0506-5Z Overview


Packed in PLCC, the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Bulk. In total, 28 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. It is part of the design of the 28 series that this electronic component is included. A 400Ohm internal resistance characterizes this multiplexer. Datasheets for 28 pin functions are available upon request. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. An effective Dual supply digital multiplexer. 1.5mA current would be enough for this multiplexer to operate. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 10V if you are using dual power supplies. The electrical part can be operated at 15V voltage levels. An environment with a temperature greater than 75°C should not be used to operate the digital switches.

HI4P0506-5Z Features


1 Channels
1.5mA Supply Current

HI4P0506-5Z Applications


There are a lot of Intersil (Renesas Electronics America) HI4P0506-5Z Analog Switches & Multiplexers ICs applications.

  • Communication systems
  • DVD-R
  • Relay replacements
  • E1 Network Equipment
  • Access Concentrators
  • Multi-Line E1 Interface Cards
  • Battery Powered Systems
  • HDTV
  • ISDN NT1/TA
  • Cell phones

Write a review

Note: HTML is not translated!
    Bad           Good