HI6-0201-5
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 80Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 500ns, 350ns |
| Charge Injection | 20pC |
| Crosstalk | -90dB @ 100kHz |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 350ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
HI6-0201-5 Overview
Due to its 16-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around 0°C~70°C TA. 16 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 16 pins. Circuits based on SPST - NC switching are used to construct these analog switch ics. A total of 4 circuits make up this switch device.
HI6-0201-5 Features
1 Channels
Switch Circuit: SPST - NC
HI6-0201-5 Applications
There are a lot of Rochester Electronics, LLC HI6-0201-5 Analog Switches & Multiplexers ICs applications.
- Communication systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Routers
- High-Voltage
- DSLAMs
- HDTV
- Medical Instrumentation
- Relay Replacement
- Cable PC
- USB 1.1 signal switching circuits
