Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1996 |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
80Ohm |
Terminal Finish |
MATTE TIN |
Max Power Dissipation |
762mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
HI6-0201 |
Pin Count |
16 |
JESD-30 Code |
R-PDSO-G16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
18V |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
20V |
Min Supply Voltage |
12V |
Nominal Supply Current |
3.8mA |
Max Supply Current |
6.5mA |
Throw Configuration |
SPST |
Turn On Delay Time |
50 ns |
Voltage - Supply, Single/Dual (±) |
12V~20V ±5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
50 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
50Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
50ns, 50ns |
Charge Injection |
10pC |
Crosstalk |
-90dB @ 100kHz |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
HI6-0201HS-9+T Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. SPST - NC switching circuits are used in these analog switch ics. A 4 circuit is present in this switch device. HI6-0201 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 80Ohm. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 12V. When the digital multiplexer is charged above 6.5mA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 20V. The electrical part can be operated at 18V voltage levels.
HI6-0201HS-9+T Features
1 Channels
Switch Circuit: SPST - NC
HI6-0201HS-9+T Applications
There are a lot of Maxim Integrated HI6-0201HS-9+T Analog Switches & Multiplexers ICs applications.
- Industrial
- Cell phones
- Video switching
- Video signal routing
- Precision test equipment
- Medical
- Audio/video switches
- High-Voltage
- Medical Instrumentation
- Isolation