HI9P0201HS-5
| Parameters | |
|---|---|
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Number of Channels | 1 |
| Operating Supply Current | 4.5mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Off-state Isolation-Nom | 72 dB |
| On-state Resistance Match-Nom | 0.9Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Switch-off Time-Max | 50ns |
| Normal Position | NC |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
HI9P0201HS-5 Overview
This electronic part is conveniently packaged in SOIC, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. This digital multiplexer has 50Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Analogue multiplexers of the Dual supply type that are cost-effective. For this multiplexer to operate, 4.5mA current would be sufficient. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. During operation, the multiplexer should not be exposed to a temperature above 75°C. It can conduct in a 4-bit manner.
HI9P0201HS-5 Features
1 Channels
4.5mA Supply Current
4-Bit
HI9P0201HS-5 Applications
There are a lot of Intersil (Renesas Electronics America) HI9P0201HS-5 Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Industrial and process control systems
- Audio and video switching
- Medical Instrumentation
- Imaging
- Relay Replacement
- Medical
- Cell phones
- High-Voltage
