HI9P0201HS-5Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 10mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Turn On Delay Time | 50 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 150 ns |
| Dual Supply Voltage | 15V |
| Off-state Isolation-Nom | 72 dB |
| On-state Resistance Match-Nom | 0.9Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
HI9P0201HS-5Z Overview
This electronic part is conveniently packaged in SOIC, making it easy to ship abroad. High reliability is ensured by the advanced packaging method Bulk. There are 16 terminations totally. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 16 pins. As far as internal resistance is concerned, it has 50Ohm. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The analogue multiplexer could operate on 4.5mA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 10mA. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. A voltage of 15V can be used to operate the electronic component. In an environment with a temperature higher than 75°C, the digital switches should not operate. The switch device is capable of conducting in a 4-bit mode.
HI9P0201HS-5Z Features
1 Channels
4.5mA Supply Current
4-Bit
HI9P0201HS-5Z Applications
There are a lot of Intersil (Renesas Electronics America) HI9P0201HS-5Z Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Digital access cross connects
- Isolation
- 65 V DACs
- Communications systems
- Communication systems
- Imaging
- Avionics
- Wireless Local Loop
- Audio signal routing
