HI9P0201HS-9Z
| Parameters | |
|---|---|
| Number of Circuits | 4 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 0.9Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 50ns, 50ns |
| Charge Injection | 10pC |
| Crosstalk | -86dB @ 100kHz |
| Switch-on Time-Max | 50ns |
| Switch-off Time-Max | 50ns |
| Drain to Source Resistance | 50Ohm |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HI-201 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
HI9P0201HS-9Z Overview
This electronic part is conveniently packaged in 16-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Bulk. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Based on SPST - NC switching circuits, these analog multiplexers work. Circuits number 4 make up this analogue multiplexer. Try searching for HI-201 variants of the analog switch ic. A Drain to Source resistance of 50Ohm is shown for this electronic part.
HI9P0201HS-9Z Features
1 Channels
Switch Circuit: SPST - NC
Drain-to-Source resistance: 50Ohm
HI9P0201HS-9Z Applications
There are a lot of Renesas Electronics America Inc. HI9P0201HS-9Z Analog Switches & Multiplexers ICs applications.
- HDTV
- CSU
- Audio and video signal routing
- Central office
- SDH
- High speed data transmission line cards
- SONET
- Industrial
- Communication systems
- Cable PC
