HI9P0509-5
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Min (Vsup) | 10V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 10pF 12pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 250ns, 250ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 20 Ω |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Neg Supply Voltage-Min (Vsup) | -10V |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
HI9P0509-5 Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. By its 4 channels, the electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. Circuits based on SP4T switching are used to construct these analog switch ics. The multiplexer consists of 2 circuits. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. It requires a minimum voltage of 10V to supply the switch device.
HI9P0509-5 Features
4 Channels
Switch Circuit: SP4T
HI9P0509-5 Applications
There are a lot of Rochester Electronics, LLC HI9P0509-5 Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Industrial
- Transmit
- Avionics test equipment
- Precision data acquisition
- Digital Cross-Connects
- SONET
- Fiber In The Loop (FITL)
- Imaging
- Existing multiplexer applications (both fault-protected and nonfault-protected)
