HI9P0549-9
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | OVERVOLTAGE PROTECTION |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.8kOhm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 30pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 10pF 12pF |
| On-state Resistance Match-Nom | 126Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 126 Ω |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
HI9P0549-9 Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. A SP4T switching circuit is used for these analog switches. It consists of 2 circuits. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. Don't forget the additional features of this electronic part, such as: OVERVOLTAGE PROTECTION.
HI9P0549-9 Features
4 Channels
Switch Circuit: SP4T
Additional Features: OVERVOLTAGE PROTECTION
HI9P0549-9 Applications
There are a lot of Rochester Electronics, LLC HI9P0549-9 Analog Switches & Multiplexers ICs applications.
- Mechanical reed relay replacement
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- New designs requiring multiplexer functions
- Transmit
- Video signal routing
- PDH Multiplexers
- Medical
- Communications systems
- RGB switches
- Microwave transmission systems
