HIP1011DCA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO REQUIRES 3.3V AND 5V SUPPLY |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 13.2V |
| Power Supplies | 3.35+-12V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 10.8V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Height Seated (Max) | 1.75mm |
| Length | 9.905mm |
| Width | 3.895mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
HIP1011DCA Overview
You can find it in the SSOP package.It's?packaged?in?the?form?of?a?Bulk.Hot-swappable device has a total of 28 terminations.DUAL is the terminal position of the device.The device consists of a total of 28 pins.A supply voltage of 12V can result in high efficiency.This gadget is self-contained in?Power Management Circuits.Positioned in direction of Surface Mount, it is at a right angle.Stable operation is enabled by a maximum operating temperature of 70°C°C.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of 0°C degrees Celsius.Normally, Vsup should remain above 10.8V.The maximum supply voltage is set to 13.2V.The power supplies of the part is 3.35+-12V.An analog IC, ANALOG CIRCUIT in this instance, is used for this gadget.By default, it is set to output 4.The same device can also be used to produce ALSO REQUIRES 3.3V AND 5V SUPPLY.
HIP1011DCA Features
The terminal position of 28
HIP1011DCA Applications
There are a lot of Intersil (Renesas Electronics America) HIP1011DCA hot swap controllers applications.
- Automotive circuits
- Circuit power protectors
- Industrial
- Industrial application
- Active current limit
- High power circuit board
- Temperature monitor output
- CompactPCI
- Redundant Array of Disks (RAID)
- Network router
