HIP1011DCA-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO REQUIRES 3.3V AND 5V SUPPLY |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 13.2V |
| Power Supplies | 3.35+-12V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 10.8V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Height Seated (Max) | 1.75mm |
| Length | 9.905mm |
| Width | 3.895mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
HIP1011DCA-T Overview
In the SSOP package you will find it.The package looks like a Tape & Reel (TR).The 28 terminations total to three.DUAL is the terminal position of the device.Total number of pins is 28.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.This gadget is self-contained in?Power Management Circuits.Positioned in direction of Surface Mount, it is at a right angle.The maximum operating temperature of 70°C°C allows for stable operation.Hot-swappable device functions at a minimum working temperature of 0°C degrees Celsius in order to maintain reliabilHot-swappable devicey.The supply voltage (Vsup) should be kept above 10.8V for normal operation.The maximum supply voltage is set to 13.2V.Hot-swappable device has a 3.35+-12V power supply, which is the power supply used in the part.An analog IC, in this case ANALOG CIRCUIT, is used in this gadget.The default setting is output 4.This device can also be used to produce ALSO REQUIRES 3.3V AND 5V SUPPLY as well.
HIP1011DCA-T Features
The terminal position of 28
HIP1011DCA-T Applications
There are a lot of Intersil (Renesas Electronics America) HIP1011DCA-T hot swap controllers applications.
- Circuit power protectors
- ISDN system
- Automotive circuits
- Loads
- Datacom
- Network switch
- Undervoltage protection
- PC board hot swap insertion and removal
- Servers
- Network router
