HIP1011DCAZA-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 28 |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO REQUIRES 3.3V AND 5V SUPPLY |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Height Seated (Max) | 1.75mm |
| Length | 9.905mm |
| Width | 3.895mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
HIP1011DCAZA-T Overview
This is included in the SSOP package.At the moment, 2 channels are accessible.Total terminations are 28.Its terminal position is DUAL.28 pins make up its total.High efficiency can be achieved when the supply voltage is 12V.This device uses 28 pins for operation.The gadget in Power Management Circuits is self-contained.In Surface Mount direction, it is positioned.In order to ensure stable operation, a maximum operating temperature of 70°C°C must be set.Maintaining reliability requires a minimum working temperature of 0°C degrees Celsius.This gadget uses an analog IC, which is ANALOG CIRCUIT in this case.The default setting is output 4.There is a maximum supply voltage of 13.2VV that it can handle.With 10.8VV, it can work with the lowest supply voltage possible.Hot Swap operates at a maximum current of 8mA.By using this device, it is also possible to produce ALSO REQUIRES 3.3V AND 5V SUPPLY.
HIP1011DCAZA-T Features
The terminal position of 28
HIP1011DCAZA-T Applications
There are a lot of Intersil (Renesas Electronics America) HIP1011DCAZA-T hot swap controllers applications.
- Overcurrent protection
- Switch
- Hard drive
- Raid
- Firewire
- Circuit breakers for electronic circuits
- Active current limit
- Thermal limitation
- Networking
- Inrush current control
