HIP1011ECAZA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO REQUIRES 3.3V AND 5V SUPPLY |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Height Seated (Max) | 1.75mm |
| Length | 9.905mm |
| Width | 3.895mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
HIP1011ECAZA Overview
The SSOP package contains it.2 channels are currently available.In the form of a Bulk, it is packaged.Hot-swappable device terminates wHot-swappable deviceh 28 in total.The terminal position of the device is DUAL.28 pins make up the entire device.High efficiency can be achieved by using 12V as supply voltage.28 pins are used in operation.As far as Power Management Circuits is concerned, this gadget is self-contained.There is a Surface Mount axis pointing in the direction of the object.Hot-swappable device is stable to operate at a temperature of 70°C°C at the maximum.Maintaining reliability requires a minimum working temperature of 0°C degrees Celsius.This gadget uses an analog IC, which is ANALOG CIRCUIT in this case.By default, output 4 is selected.An output voltage of 13.2VV is its maximum.Low supply voltages, such as 10.8VV, can be used.Hot Swap requires a maximum current of 8mA to operate.With the help of this device, ALSO REQUIRES 3.3V AND 5V SUPPLY can also be produced.
HIP1011ECAZA Features
The terminal position of 28
HIP1011ECAZA Applications
There are a lot of Intersil (Renesas Electronics America) HIP1011ECAZA hot swap controllers applications.
- Network router
- Distributed power systems
- Board or blade insertion into live backplanes
- Overvoltage protection
- Loads
- Short circuit protection
- Redundant negative voltage supplies
- Thermal limitation
- Raid
- Active current limit
