HIP1011ECAZA-T
| Parameters | |
|---|---|
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO REQUIRES 3.3V AND 5V SUPPLY |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Height Seated (Max) | 1.75mm |
| Length | 9.905mm |
| Width | 3.895mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 28 |
HIP1011ECAZA-T Overview
It's included in the SSOP package.2 channels are currently available.This device has a total of 28 terminations.There is a DUAL terminal position on the device.The device consists of a total of 28 pins.High efficiency can be achieved with a voltage supply of 12V.A 28 pin is used for operation.A gadget like this is self-contained in Power Management Circuits.Positioned in direction of Surface Mount, it is at a right angle.Stable operation can be achieved with a maximum operating temperature of 70°C°C.The system must function at a minimum temperature of 0°C degrees Celsius in order to maintain its reliability.As for the IC, this gadget uses ANALOG CIRCUIT.As a default, it's set to output 4.A maximum supply voltage of 13.2VV can be handled by it.If necessary, it can work with a low supply voltage, such as 10.8VV.In order to operate it, 8mA is the maximum current needed.By using this device, it is also possible to produce ALSO REQUIRES 3.3V AND 5V SUPPLY.
HIP1011ECAZA-T Features
The terminal position of 28
HIP1011ECAZA-T Applications
There are a lot of Intersil (Renesas Electronics America) HIP1011ECAZA-T hot swap controllers applications.
- Loads
- Central office switching systems
- Supply voltage monitoring
- Servers
- Inrush current control
- Limitting the inrush current
- Base station
- Redundant Array of Disks (RAID)
- Hard drive
- Switch
