HIP1012ACB
| Parameters | |
|---|---|
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | Hot Swap Controller |
| Terminal Finish | TIN LEAD |
| Applications | General Purpose |
| Voltage - Supply | 10.5V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Supply Voltage-Min (Vsup) | 10.5V |
| Number of Channels | 2 |
| Adjustable Threshold | YES |
| Current - Supply | 8mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout |
| Feature Pins | CPUMP, CTIM, (MODE, /PWRON1), PGOOD, /PWRON2, RILIM |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
HIP1012ACB Overview
You get it with the 14-SOIC (0.154, 3.90mm Width) package.At the moment, 2 channels are accessible.Tube-shaped packaging is used.Total terminations are 14.Device DUAL is in the terminal position.14 pins make up the entire device.High efficiency can be achieved by using 12V as supply voltage.This is set up in the same way as Surface Mount.Hot-swappable device is classified as a Hot Swap Controller electrical component.A temperature setting of 0°C~70°C will ensure reliable operation.There are General Purpose applications on the device.As you can see in Latched Fault, UVLO, it's featured.In theory, it should work as long as the power source has a 10.5V~13.2VV input.There are Current Limit, Fault Timeout programmable features on this device.8mA is currently in short supply.The supply voltage (Vsup) should be kept above 10.5V for normal operation.
HIP1012ACB Features
The terminal position of 14
Features of Latched Fault, UVLO
Programmable features of Current Limit, Fault Timeout
HIP1012ACB Applications
There are a lot of Rochester Electronics, LLC HIP1012ACB hot swap controllers applications.
- Base station power distribution system
- Networking
- Avionics systems
- Continuous monitoring of device temperature
- Network switches
- Raid
- ISDN system
- Power supply hotswap & inrush control
- USB interface
- Load transient protection
