HIP1013CB
| Parameters | |
|---|---|
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| Feature | Fault Timeout, Latched Fault, UVLO |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Hot Swap Controller |
| Applications | General Purpose |
| Voltage - Supply | 10.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | HIP1013 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Output Voltage | 5V |
| Input Voltage-Nom | 12V |
| Number of Channels | 2 |
| Current - Supply | 8mA |
| Input Voltage (Min) | 10.5V |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 16V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker |
| Feature Pins | CPUMP, (MODE, /PWRON1), PGOOD, /PWRON2, RILIM |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
HIP1013CB Overview
You get it with the 14-SOIC (0.154, 3.90mm Width) package.At the moment, there are 2 channels available.Tube-shaped packaging is used.There are 14 terminations in total.This device has a terminal position of DUAL.A total of 14 pins are present on it.Surface Mount is set up this way.The electrical component in question falls into the classification Hot Swap Controller.If you want reliable performance, you should set the temperature to 0°C~70°C.Hot-swappable device has General Purpose applications.A feature of Fault Timeout, Latched Fault, UVLO describes it.In the case of a 10.5V~16VV power source, it should work just fine.The number HIP1013 belongs to the HIP1013 family.Among its programmable features are Circuit Breaker.In the present, there is a shortage of 8mA.Hot Swap is possible to achieve high efficiency wHot Swaph a 5V output voltage.
HIP1013CB Features
The terminal position of 14
Features of Fault Timeout, Latched Fault, UVLO
Programmable features of Circuit Breaker
Output voltage of 5V
HIP1013CB Applications
There are a lot of Renesas Electronics America Inc. HIP1013CB hot swap controllers applications.
- Redundant-array-of-independent-disk (RAID) storage
- Servers
- Load transient protection
- Industrial high-side switches
- Overcurrent protection
- Telecom server
- Reverse current protection
- PC board hot swap insertion and removal
- Short circuit protection
- Redundant Array of Disks (RAID)
