HIP2100IBT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -55°C |
| Subcategory | MOSFET Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| JESD-30 Code | R-PDSO-G8 |
| Max Output Current | 2A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 14V |
| Min Supply Voltage | 9V |
| Power Dissipation-Max | 1.3W |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Current - Output | 2A |
| Turn On Delay Time | 8 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Turn-Off Delay Time | 8 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 2A |
| High Side Driver | YES |
| Turn Off Time | 0.045 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
HIP2100IBT Overview
A higher degree of flexibility is achieved by adopting its SOIC package.Configuration is based on 2 drivers.It's configured with 8 terminations.Mosfet driver is mounted using the Surface Mount method.This device operates with 12V supply voltage.There is an interface IC called HALF BRIDGE BASED MOSFET DRIVER that is employed in this device.The maximum output current can amount to 2A.Several electronic components are included in its subcategory of MOSFET Drivers.Mosfet gate drivers is permissible to set the operating temperature to 150°C.-55°C is the minimum permissible operating temperature.Keeping the supply current at 2.5mA ensures greater stability.For operation, it requires a voltage of 14V.A minimum supply voltage of 9V is required for operation.As a result, it outputs a 2A current.
HIP2100IBT Features
2 drivers
HIP2100IBT Applications
There are a lot of Intersil (Renesas Electronics America) HIP2100IBT gate drivers applications.
- Automotive Applications
- Uninterruptible Power Supplies (UPS)
- Motor Control
- DC-DC Converters
- Commercial air-conditioning (CAC)
- Industrial Modules
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Topologies
- High-voltage isolated DC-DC converters
